- Single 2.5GbE RJ45 port with Intel I225-V controller; NBASE-T (802.3bz) compatible
- Auto-negotiates 2.5G/1G/100M/10M over existing Cat5e/Cat6 (or better) cabling
- Intel vPro, PXE boot, Wake-on-LAN, VLAN tagging and 9K jumbo frames
- Built-in heat sink, link/speed LEDs and LAN transformers for signal quality
- PCI Express 2.0 x1; standard bracket fitted, low-profile bracket included
- Compatible with Windows, Windows Server, VMware and Linux
PCIe network card with Intel® I225-V chip features multi-Gigabit speeds with NBASE-T support
This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.
Increased Network Speed
The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTP, online or local storage/backup, and the streaming of online content - while reducing network slowdowns. Access up to 2.5GBASE-T speeds over Cat5e (or better) cabling, to maximize existing networks and equipment.
Enhance Existing Hardware
The network interface card connects via an available x1 PCI Express 2.0 (or higher) expansion slot. The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers. This Ethernet NIC card is compatible with Windows, Windows Server, and Linux.
This card supports the following advanced features: PXE boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology.
